Coffee Lovers Blog Hop


Welcome to a super special blog hop, celebrating the 2018 Fall |Winter Coffee Lovers Blog Hop!

I am super excited to play along AND more excited to announce that WOW! Embossing Powder has a $20 gift card as a super sponsor prize up for grabs for this hop. 

They will also be giving away 2 x $10 Gift cards if you leave a comment on the WOW! Embossing Blog and the Creative Team listed below.

Winners of the $20 gift card hop will be announced on the Coffee Lovers Facebook group on Sunday, Dec. 9.

Winners of the 2 x $10 Gift cards will be announced on the WOW! blog on Sunday, Dec. 9.

Confession. I hate coffee. I know to many of you, this is akin to heresy. I do love the smell of a freshly brewed cup, but cannot abide the taste. That said, I do have this small obsession with coffee/tea pots and cups. So that’s what inspired me to come up with a little home decor piece to give to a friend.

coffee-final

I started by inking my background with Broken China Distress Oxide ink. After heat setting it with my heat gun, I used the same ink to stamp my background pattern for a tone-on-tone look.

For my “table,” I used Antique Linen, Tea Dye and Vintage Photo Distress Oxide ink blended together. I then used the Lace stamp from the Tim Holtz Ornate and Lace stamp set to give the table a bit of a pattern. I taped this to my background.

Next I die cut my coffee cup using the Cottage Cutz Small Teacup die. I inked both the cup and saucer with Bundled Sage Distress Oxide, then used an old gift card to scrape a bit of white gesso on top, to give it a more distressed/aged look. For the flower decoration, I used my WOW! Embossing Pen to first apply Taffeta Pink embossing powder to the flower, then Metalline Greengage to the leaves. I adhered the cup onto my “table” using foam tape for a more dimensional look.

For the “steam,” I used one of the Dot Flourish stamps by Inkadinkado and heat embossed it onto my background using WOW!’s White Puff Powder.

Finally, for my sentiment, I used a stamp from my stash and heat embossed it using Chocolate Caramel Pearl onto a piece of white card stock. I trimmed it down, distressed the edges and inked the edges with Tea Dye Distress Ink. I popped it onto the piece with another piece of foam tape.

This is a 4×6 piece that fits beautifully in a matted 5×7 frame, perfect to gift to special, coffee-loving friend!

Hop on over to see all the creations made by some wonderful crafters!

Ashlee McGregor
Caroline Selby
Dana Gong
Gerry van der Velden
Jo Herbert
Karen J Reategui
Olga Lukaseviciene
Raluca Vezeteu
Yaz Diaz

Wow Embossing Powder Blog

Advertisements

Guest Designer: Be Jolly

Good morning! I’m back on the WOW! Embossing Powder blog today with an altered MDF ornament. I’ve used several different embossing powders along with Finnabair paints and the Prima Santa Baby collection to create this delightful little holiday piece. Head on over to the WOW! blog for more details and photos!

ornament-final

Guest Designer: The WOW! Factor

I like making cards because I just like making things. I don’t have a lot of use for cards, as I don’t really have anyone to send them to, but I still like making them. I still feel like a novice compared to many I’ve seen online, but it’s fun and relaxing and if you’ve ever wanted to give card making a try, I say go for it!

One of the first things I learned about card making was how to take an ordinary card design and make it pop. One of the easiest ways to do this is to add embossing powder to your design. Embossing powder, especially the metallics and sparkly ones, can give your card that “Wow” factor. (Pun intended, heh.)

3 cards-final

Today, for my second social media guest post for WOW! Embossing Powder, I thought I’d take three cards I’d made in the past and jazz them up with EPs. It’s amazing what a little sparkle can do for your design.

FullSizeRender (7)
Lawn Fawn card — before

For my first card, I’d made a cute little scene using the Lawn Fawn I Scream for Ice Cream dies. I used the following Lawn Fawn cardstock to create my sweet little treats: Ballet Slippers, Vanilla Malt, Chili Pepper, Paper Bag, Chocolate Bar, Noble Fir and Black Licorice. I glued all my parts together and mounted them on a background using Lawn Fawn’s quilted backdrop. For my sentiment, I used a stamp from LF’s Bannertastic in Ballet Slippers ink with the sentiment from the Sweet Treats stamp set.

It’s a cute card, but it can so easily be taken up a notch by adding embossing powders.

card1b-final copy
Lawn Fawn card — after

For this one, I made the card the same way, but for the vanilla cone, I used Sparkling Snow embossing powder to create some pretty shimmer. I also used Red Glitz to make both the cherry and heart sparkle. And finally, I used In the Pink embossing glitter to turn my strawberry cone into strawberry swirl using a flourish stamp. The sentiment I embossed using Metalline Greengage and I finished the card off with some Nuvo Crystal Glaze to give the chocolate topping some shine.

EWCO9332

* * * * *

For my next card, I thought I’d play with Concord and 9th’s Wreath Turnabout stamp.

FullSizeRender (8)
Concord & 9th card — before

A simple, pretty card, right? I stamped each turn with the following Versafine Clair inks: Verdant, Green Oasis, Shady Lane and Summertime. The sentiment was also stamped with Green Oasis ink.

card2b-final
Concord & 9th card — after

To make the card extra special, I used the green Versafine Clair inks for the first three turns of the stamp. But for the final turn, instead of the Summertime ink, I used the WOW Clear Ultra Slow Drying Embossing Pad to stamp with embossing ink. I sprinkled Metallic Gold Sparkle over the card and heat set it, giving it that extra special touch. I also used Metalline Greengage to emboss the sentiment in the center before finishing the card with a few sequins.

(Tip: Make sure the ink is completely dry before using the embossing powder for the last turn!)

LQIU8944

* * * * *

With my last card, I wanted to play with color layering stamps. I used the Hero Arts Color Layering Seahorse along with a few elements from the Color Layering Goldfish set.

FullSizeRender (9)
Hero Arts card — before

Color layering stamps create a beautiful layering effect when used with different color inks. For my seahorse card, I used Lawn Fawn inks in the following colors:

• Seahorse: Grape Sode, Juice Box, Sugarplum

• Starfish: Peace fuzz, Pumpkin Spice

• Turret shell: Ballet Slippers, Wild Rose

• Scallop shell: Moonstone, Peacock

•Seaweed: Freshly Cut Grass, Jalapeno

I used the coordinating dies to cut out my stamped images and adhered them onto a die-cut stitched circle from Lawn Fawn using tacky glue and foam squares. For the background, I used the Tim Holtz Waves embossing folder on some blue cardstock. The sentiment was stamped using Fish Tank ink.

Now, it’s a pretty card by itself, but when you add embossing powder as the last layer of the stamp, it adds that extra special touch for your recipient.

card3b-final
Hero Arts card — after

I restamped my images using the same inks, but instead of the last ink, I used the following embossing powders:

• Seahorse: Persian Indigo

• Starfish: Golden Flame

• Turret shell: Coral Reef

• Scallop shell: Calypso

The card simply glitters in the light!

EHZA2866

Thanks for stopping by and again, my thanks to the WOW Embossing Powder team for allowing me to play with them this month!

Supplies used: 

WOW! embossing powders:

MMP Challenge: We Are All Dreamers

I don’t usually fall hard for an entire paper collection, but when I saw Prima’s Moon Child release, I knew I had to have it all. And the colors reminded me of the Mixed Media Place mood board for their monthly challenge, so as soon as my order arrived, I got to work on a new project straight away.

image24729

I really enjoy decorating these MDF shapes. For close-ups of my butterfly, please click the photos below.

 

Stop by the Mixed Media Place blog and have a look at all the other entries. So much creativity on display! 🙂

mmp-moodboard-10-2018

Guest Designer: Nature’s Sketchbook

Hello again, everyone! I’m back this week with another project for WOW! Embossing Powder. I wanted to do a variety of projects for my tenure as guest designer, so I knew I had to create an art journal layout as one of my projects!

I had thought, at first, to do an autumn-inspired layout, since we are so close to Thanksgiving here in the U.S. But like so many of my plans, they changed as I progressed. Still, I wanted to challenge myself by using some autumn colors — reds and oranges — two colors I am just not comfortable working with. I think it turned out OK in the end!

artjournal-final

I decided to work in my Moleskin journal. I wanted to add a bit of texture in the background, so I grabbed some washi tape — which turned out to be Halloween tape, but it worked! — and added some strips here and there until I was happy.

EF22826F-06A8-44EC-844B-DAF1D7B7F924

I then covered the pages and tape with a thin layer of white gesso.

B11DFFB6-8577-4F6D-B67D-F4FC60F1F67B

After that dried, it was time to create my background! First, I added some Botanical remnant rubs from Tim Holtz.

65E91632-75A1-4489-B969-52347E08C28D

I then used Lindy’s Stamp Gang Starburst sprays for the colors — Autumn Maple Crimson, Sea Mint Green, Yellow Rose of Texas, Hag’s Wart Orange and Rudolph’s Nose Red. The rub-ons left a nice white halo around themselves as I sprayed. I then took the Travel Journal background stamp from Carta Bella and stamped randomly over the pages with embossing ink. I used Perissa embossing powder to add texture and shine to the stamped images. Finally, I used the Honeycomb stamp from Stampendous to add a little bit of texture using Acorn Versafine Clair ink.

3E26D75E-696B-4C75-85B5-341CFFB6D7EA

I stamped out a few bugs using the Tim Holtz Entomology stamp set. I colored them with Distress Markers and added some Nuvo Crystal Glaze on top to make them shiny. I also die cut some flowers and leaves. I colored some with Distress Inks and some with embossing powders in Metalline Greengage, Kiwi Krush and Metalline Flame. I used papers from the Graphic 45 Nature’s Sketchbook collection that I distressed to create “boxes” for my bugs and layered the die cuts and a bit of linen behind them. A large butterfly from my stash was the finishing touch!

Thanks for stopping by! I’ll have another fun project for you next week!

WOW Embossing Powders:

Other supplies:

Art journal: September and October

Can you believe how fast 2018 has flown by? Today, I have two more art journal layouts done for my Julie Nutting art journal: September and October.

image24684
Take Risks

I was at a bit of a loss for September at first. My initial thought was to do a fall theme, but since summer stayed so long, I just wasn’t in the autumn mood. The month passed quickly and before I knew it, it was almost over! I started digging around in my stash for ideas and came upon some papers from Graphic 45’s Imagine collection. That’s when it hit me — Steampunk September!

I found another sheet of scrapbook paper in coordinating colors to use as the background. I then set about fussy cutting pieces of the Graphic 45 paper to use in an aerial layout. For my steampunk lady, I decided to use the Julie Nutting Twinkle doll. She’s meant to be a Christmas doll, but she can be very versatile for other themes! I paper pieced her outfit together using the Kaisercraft Factory 42 collection. Her wings are a stamp from my stash that I fussy cut and added Nuvo crystal glaze to the top. Finally, I added a few small gears and bobs to her outfit to complete my doll. I finished the layout with two quote stickers from the Tim Holtz Small Talk collection.

image24722
From Regions Beyond

For October, obviously, it was going to be an homage to my favorite holiday — Halloween! For my little witch, I used the Julie Nutting Lil Witch stamp and die set. Her outfit was paper pieced using various Halloween papers from my stash. I colored her green, like any self-respecting witch should be.

For the background, I used a piece of scrapbook paper from Reminisce for a haunted forest feel. I dug into my vast collection of Halloween stickers to decorate my scene with. I’d been wanting to use that house sticker for a long time!

To finish off my layout, I used the Tim Holtz Halloween remnant rubs to add some spooky sentiments and spiders to the page.

Thanks for stopping by. I’m already busy planning my layouts for November and December!

Guest Designer: All is Calm, All is Bright

Hello, everyone! I am so excited and amazed that I was asked to be a guest designer for WOW! Embossing Powder for November. Since the theme was Christmas this month, I’ve created a little altered embroidery hoop using several different powders and Tim Holtz die cuts. Head on over to the WOW! blog for more photos and details for this project!

final-hoop1
All is Calm, All is Bright